Wear detection
Sonos Ace uses sensors in the ear cups to detect if it's on your head and ready to use. When
you take it off, Sonos Ace pauses your content so you don't miss a second.
Note: Sonos Ace will turn off after 30 minutes of inactivity.
Wear Detection is enabled by default. You can disable it in the Sonos app:
1. Go to System Settings .
2. Select your Sonos Ace under Headphones.
3. Select Wear Detection, then toggle Wear Detection on or off.
Note: If Wear Detection is disabled your Sonos Ace won't turn off after 30 minutes of
inactivity.
Feature Description
Play/Pause
Content pauses when you take your
headphones off and resumes when you
put them back on.
Phone calls
Enable in System Settings . When
you're getting a call, put on your Sonos
Ace to answer automatically.
Note: When you take off Sonos Ace
during a call, the call will continue out loud
on your phone/mobile device.
Product settings
Use the Sonos app to adjust product settings for Sonos Ace:
1. Go to System Settings .
2. Navigate to Headphones and select your Sonos Ace.
To Next Page
Loading...