Sonos Ace - Page 9

Light Description
Solid white
Powered on, not connected to a Bluetooth
device.
Solid blue
Powered on, connected to a device via
Bluetooth.
Blinking blue
Powered on, searching for a Bluetooth
device.
Multipoint
You can connect your Sonos Ace to 2 Bluetooth devices and automatically switch between
audio streams. Make sure Bluetooth is enabled on both of your devices.
In the Sonos app:
1. Go to System Settings .
2. Select your Sonos Ace.
3. Navigate to Bluetooth, then toggle 2 Device Connections on or off.
Note: 2 Device Connections is off by default.
Head tracking for Bluetooth
Sonos Intelligent Motion Processing with Dolby Head Tracking is available during Bluetooth
playback. This industry-leading Dolby Atmos experience surrounds you in hyperrealistic
sound with different elements of the music coming from points around your head.
You can enable or disable Head Tracking in the Sonos app:
1. Go to System Settings .
2. Select your Sonos Ace under Headphones.
3. Navigate to Sound, then toggle Head Tracking on or off.