Product Guide
8
Important safety information
Flashing red Speaker setup timed out.
This happens if a speaker is
plugged in for 30 minutes
without being set up.
CONNECT, SUB,
CONNECT:AMP,
PLAY:1, PLAY:3,
PLAY5,
PLAYBAR,
PLAYBASE
Unplug the speaker, wait 10 seconds,
plug it back in, and set it up.
Warning:Under no circumstances should the product be repaired by anyone other
than an authorized Sonos repair center, as this will invalidate the warranty. Please
contact Sonos Customer Support for more information. Do not open the system as
there is a risk of electric shock.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos
components.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that
produce heat.
8. Protect the power cable from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Indicator Lights Status Sonos Product Additional Information
To Next Page
Loading...
Need help?
General
Weight and Dimensions
