Sonos SUB User Manual

SONOS USER GUIDE
Connector panel
HDMI ARC Use an HDMI cable to connect Amp to your TV’s HDMI
ARC port.
Join button Press to connect during setup.
AC power (mains) port Use only the supplied power cord (using a third-party
power cord will void your warranty).
Note: Insert the power cord firmly.
Analog audio in Use a standard RCA audio cable to connect Amp’s
analog audio inputs to the audio outputs from a
separate audio component, such as a turntable or a
portable music player.
Ethernet ports (2) Use an Ethernet cable if you want to connect to a router,
computer, or network-attached storage (NAS) device
(optional).
Subwoofer output
Note: If you disconnect your subwoofer, make
sure to also disconnect the subwoofer’s
cable from the Amp output.
Connect a powered subwoofer to this output using a
standard RCA cable. The system will detect when a
cable is connected to the subwoofer output and adjust
the crossover frequency automatically.
Speaker terminals Use high-quality speaker wire to connect your speakers
to Amp.
Analog audio in
HDMI ARC
Subwoofer output Speaker terminals
Join button
AC power
(mains) port
Ethernet ports

Sonos SUB Specifications

General

Subwoofer type	Active subwoofer
Wireless subwoofer	Yes
Subwoofer frequency range	- Hz
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Product color	Black
Wireless standard	802.11b/g

Weight and Dimensions

Subwoofer depth	158 mm
Subwoofer width	402 mm
Subwoofer height	380 mm
Subwoofer weight	16000 g