Sonos ZoneBridge Setup Guide
7
Do not connect the ZoneBridge directly to your cable or DSL modem unless
your modem has a built-in router.
• If you don’t have a router, go to http://faq.sonos.com/norouter for instructions.
• If you don’t have an open port on your router, you can disconnect your
computer from the router and connect it to the ZoneBridge instead (see below).
Then connect the ZoneBridge into the router port the computer was previously
plugged into.
Cable/DSL
modem
Router
ZoneBridge
Computer
Viper Book.book Page 7 Friday, June 29, 2007 5:01 PM
To Next Page
Loading...
