Sonos ZoneBridge Setup Guide
10
2. If you are making a wired connection, connect a standard Ethernet cable from your
router, another ZonePlayer or ZoneBridge, or a live network wall plate to one of the
Ethernet switch connections on the back of the new Sonos component. If you are
making a wireless connection, skip this step.
3. Attach the power cable (if you haven’t already done so) and apply power.
4. Choose one of the following options:
•Using the Sonos Controller, select System Settings→Add a ZonePlayer or
ZoneBridge from the Music menu.
•Using the Desktop Controller software, select Add a ZonePlayer or
ZoneBridge from the Zones menu.
Add a Controller
You should charge your new Sonos Controller when you remove it from the packaging.
Plug it into the power adapter, and then follow the Controller’s on-screen prompts to
add it to your music system (you can use the Controller while it is charging.)
Viper Book.book Page 10 Friday, June 29, 2007 5:01 PM
To Next Page
Loading...
