L741 User Manual
4890-0063-01A
4-4
4.3 Scanning
Please follow instructions in the operator’s manuals of your
SonoScape ultrasound system to select the probe and the imaging
modes, adjust the parameters, and perform scanning.
Read the operator’s manual of the ultrasound system
thoroughly before performing the scanning. Make sure
that the warning and caution messages inside the
manuals have been read and properly understood.
4.4 Cleaning and disinfection
Surface probes should be cleaned after every use.
If biopsy guide is used, follow instructions in the biopsy guide
operation manual to clean and disinfect the biopsy guide.
To Next Page
Loading...