L741 User Manual
4890-0063-01A
4-1
4 Preparing and Using the Probes
4.1 Inspection and connection
Inspecting probes
After each use, or before first use after long-time period storage of the
probe, the probe must be examined for any damages listed in the table
below. Stop using the probe if any da mage is found. Contact
SonoScape or the local repres entative of SonoScape for
repairing/replacing of the probe.
Possible damage types
Cracks on the probe handle (user section).
Cracks on the probe head (applied section).
Scratches on the probe head (acoustic window surface).
Swell of the acoustic window material.
Cracks or wear on the probe cable.
Cracks on the probe connector or any other kinds of visible
damage.
Deformed pins or broken pins existing inside the probe
connectors.
To Next Page
Loading...