L741 User Manual
4890-0063-01A
2-5
• The probes listed in this manual should be
connected and used with only the ultrasound
systems produced by SonoScape. To find the
probe models supported by your ultrasound
system, consult your operator’s manuals.
• Improper handling can easily damage the probe!
Avoid any kind of collisions or mechanical
vibrations.
• If any cracks on the transducer surface and/or
wear on the probe cable are observed, stop using
the transducer immediately to avoid electric shock
hazard. Contact your SonoScape representative for
servicing.
• When connecting or disconnecting a transducer,
make sure the system is either in freeze mode
(from real time scanning mode, press Freeze key
to activate) or preparation mode (from real time
scanning mode, press MENU key to activate).
To Next Page
Loading...