Need help?Do you have a question about the Sonova Phonak TV Connector and is the answer not in the manual?
General| Brand | Sonova |
|---|---|
| Model | Phonak TV Connector |
| Category | Hearing Aid |
| Language | English |
Details the Connect button, indicator light, microUSB power socket, and audio input sockets.
Instructions for connecting the USB cable to the power supply unit and mains power.
Notes initial automatic connection to hearing aids and how to power the device.
Explains the two supported audio inputs: Analog (3.5mm jack) and Optical (Toslink).
Emphasizes connecting the audio cable to the audio OUTPUT of the TV or device.
Details connecting the 3.5mm jack cable to the TV's headset output socket.
Explains connecting the optical (Toslink) cable to the TV Connector and TV's optical output.
Steps for pairing hearing aids, including pressing the Connect button and proximity requirements.
Details confirmation beep, connection time, and automatic reconnection of hearing aids.
Specifies mono/stereo support and advises against Dolby/DTS, recommending PCM audio format.
Instructs to switch on the TV/audio device for automatic audio streaming to hearing aids.
Covers accepting audio signals, device power state, and LED status for no input.
Explains how audio transmission terminates when hearing aids are out of range and resumes upon return.
Instructions to switch off the TV/audio source to put the TV Connector into standby mode.
To Next Page