Getting started
Assembly
Before you start using your phone, you need to insert a SIM (Subscriber Identity Module)
card and the battery.
To insert the SIM card
1
Remove the battery cover.
2
Pull out the SIM card holder.
3
Put the SIM card into its holder with the gold-coloured contacts facing down.
4
Push the holder back into place.
To insert the battery
1
Insert the battery with the label side up and the connectors facing each other.
2
Put the battery cover into place.
Turning on the phone
To turn on the phone
5
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
