23Calling
To call your voice mail service
• From stand-by press and hold
down .
To edit your voice mail number
1 From stand-by select Menu
} Messaging } Settings } Voicemail
number.
2 Enter the number and select OK.
Voice control
By creating voice commands, you can:
• Voice dial – call someone by saying
their name.
• Magic word – activate voice control
by using an uncommon word or
sentence you choose.
• Voice answer – answer and reject
calls using the Voice Answer feature
and a portable or vehicle hands-free.
To activate voice dialling and record
commands
1 From stand-by select Menu } Settings
} the General tab } Voice control
} Voice dialling } Activate } Yes
} New voice and select a contact.
2 If the contact has more than one
number, use and to view the
numbers. Select the number to add
the voice command to. Record a voice
command such as “John mobile”.
3 Follow the instructions on the
screen. Wait for the tone and say
the command to record. The voice
command is played back to you.
4 If the recording sounds OK, select
Yes. If not, select No and follow
the instructions on the screen.
Caller name
You can hear the recorded contact
name play when receiving a call from
the contact.
To use the caller name
1 From stand-by select Menu
} Settings } the General tab
} Voice control } Play caller name.
2 Select an option.
To voice dial from the phone
1 From stand-by press and hold down
or .
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
To voice dial with a hands-free
• From stand-by press and hold down
the hands-free key.
This is the Internet version of the User's guide. © Print only for private use.
To Next Page