Next, select [Remote Shoot (PC Remote)] on the screen displayed on the camera.
Hint
In [Remote Shoot Setting] under [
Cnct./PC Remote], you can set the save destination and saved format of still images for PC
remote shooting.
When [Access Authen.] is set to [Off] and you are connecting via a Wi-Fi access point, you need to pair the camera with the
computer. Select MENU →
(Network) → [ Cnct./PC Remote] → [PC Remote Function] → [Pairing] after Step 1, and then
pair the camera and the computer using Imaging Edge Desktop (Remote) on the computer. Pairing information is deleted when
you initialize the camera.
Related Topic
Introduction to computer software (Imaging Edge Desktop/Catalyst)
Remote Shoot Setting
TP1000827139
5-051-980-12(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
