ILCE-7M3
4-732-950-11(1)
GB
44
C:\4732950111\4732950111ILCE7M3UC2\01GB-ILCE7M3UC2\030BAS.indd
DTP data saved: 2017/11/01 09:29
PDF file created: 2017/11/01 09:36
Touch Focus
You can select a subject on which to focus using touch operations in the
still image and movie recording modes.
MENU (Setup) [Touch Operation] [On].
Specifying the position where you want to focus in the
still image mode
You can focus on the desired position by touching the monitor.
Select a [Focus Area] other than [Flexible Spot] or
[Expand Flexible Spot].
MENU
(Camera Settings 1) [Center Lock-on AF]
[Off].
Touch the monitor.
• When shooting with the monitor, touch the subject to focus.
• When shooting with the viewfinder, you can move the position of
the focus by touching and dragging on the monitor while looking
through the viewfinder.
• When the shutter button is pressed halfway down, the camera
focuses on the focusing frame. Press the shutter button all the way
down to shoot images.
• To cancel focusing with touch operations, touch
or press the
center of the control wheel if shooting with the monitor, and press
the center of the control wheel if shooting with the viewfinder.
To Next Page
Loading...
