Sony a7 R III User Manual

ILCE-7RM3A
5-026-886-11(1)
GB
17
Preparations for shooting
\\win-473\CAMERA\CX88900(MGA)_CX88800(CQA)_IM\01_Compose\CQA_GB\5026886111\5026886111ILCE7RM3AUC2\01GB-ILCE7RM3AUC2\020PRE.indd
DTP data saved: 2020/11/20 19:22
PDF file created: 2020/11/20 19:27
Notes on the cable protector
Use the cable protector to prevent a cable from being disconnected when
shooting images with the cable connected.
To attach the cable protector
 Thread the cable through the cable protector.
 Open both of the jack covers on the monitor side and insert the cable
into one of the jacks.

Fit the hook of the cable protector
into the slit under the Multi/Micro
USB Terminal.
• Attach the cable protector as
illustrated so that the upper jack
cover fits into the notch in the cable
protector, and then insert the claw of
the cable protector into the slit next to
the HDMI micro jack.
 Push the attachment screw in and
turn it to secure the cable protector.
Insert the upper jack
cover into the notch
Attachment
screw
Fit the hook into
the slit
 Insert the cable into the holding part
and then secure the cable with the
fixing dial.
Fixing dial
To remove the cable protector
Loosen the attachment screw. Push
down the upper part of the cable
protector and pull it out as illustrated.

Sony a7 R III Specifications

General

Sensor Resolution	42.4MP
ISO Range	100-32000 (expandable to 50-102400)
Image Processor	BIONZ X
Continuous Shooting	Up to 10 fps
Video Resolution	4K UHD (3840 x 2160)
Image Stabilization	5-axis sensor-shift
Mount	Sony E-mount
Dimensions	126.9 x 95.6 x 73.7 mm
Wireless Connectivity	Wi-Fi, NFC, Bluetooth
Sensor Type	CMOS
Autofocus Points	399 phase-detection
Viewfinder	Electronic, 3.69M-dot OLED
LCD Screen	3.0" tilting touchscreen, 1.44M-dot
Battery Life	Approx. 650 shots
Weight	657 g
Memory Card Slots	2 (SD/SDHC/SDXC, UHS-II compatible in one slot)