Sony a7 R III User Manual

ILCE-7RM3A
5-026-886-11(1)
GB
26
\\win-473\CAMERA\CX88900(MGA)_CX88800(CQA)_IM\01_Compose\CQA_GB\5026886111\5026886111ILCE7RM3AUC2\01GB-ILCE7RM3AUC2\020PRE.indd
DTP data saved: 2020/11/20 19:22
PDF file created: 2020/11/20 19:27
To charge the battery pack while it is inserted in the
camera
Turn the camera off and connect it to a device such as a computer using
the USB cable.
If you turn on the camera, power will be supplied from the computer
or the device that you connected, and you will be able to operate the
camera. However, the battery pack will not charge.
Use the USB Type-C cable (supplied) or a USB-standard cable.
To remove the battery pack
Make sure that the access lamp
(page 13) is not lit, and turn off
the camera. Then, slide the lock lever
and remove the battery pack. Be
careful not to drop the battery pack.
Lock lever
Step 3: Inserting a memory card
For details on memory cards that can be used with this camera, refer to
page 82.
1
Open the memory card cover.

Sony a7 R III Specifications

General

Sensor Resolution	42.4MP
ISO Range	100-32000 (expandable to 50-102400)
Image Processor	BIONZ X
Continuous Shooting	Up to 10 fps
Video Resolution	4K UHD (3840 x 2160)
Image Stabilization	5-axis sensor-shift
Mount	Sony E-mount
Dimensions	126.9 x 95.6 x 73.7 mm
Wireless Connectivity	Wi-Fi, NFC, Bluetooth
Sensor Type	CMOS
Autofocus Points	399 phase-detection
Viewfinder	Electronic, 3.69M-dot OLED
LCD Screen	3.0" tilting touchscreen, 1.44M-dot
Battery Life	Approx. 650 shots
Weight	657 g
Memory Card Slots	2 (SD/SDHC/SDXC, UHS-II compatible in one slot)