ILCE-7RM3A
5-026-886-11(1)
GB
42
\\win-473\CAMERA\CX88900(MGA)_CX88800(CQA)_IM\01_Compose\CQA_GB\5026886111\5026886111ILCE7RM3AUC2\01GB-ILCE7RM3AUC2\030BAS.indd
DTP data saved: 2020/11/20 19:22
PDF file created: 2020/11/20 19:27
Note
• The shooting speed during continuous shooting becomes slower when
[ RAW File Type] is set to [Uncompressed].
• The shooting speed during continuous shooting becomes slower
when [e-Front Curtain Shut.] is set to [Off] in [Continuous Shooting: Hi],
[Continuous Shooting: Mid] or [Continuous Shooting: Lo] mode.
• When the F-value is greater than F8 in [Continuous Shooting: Hi+],
[Continuous Shooting: Hi] or [Continuous Shooting: Mid] mode, the focus is
locked to the setting in the first shot.
• The subject is not displayed in real-time on the monitor or viewfinder when
shooting in [Continuous Shooting: Hi+] mode.
• Continuous shooting is unavailable in the following situations:
– [Picture Effect] is set to [Rich-tone Mono.].
– [DRO/Auto HDR] is set to [Auto HDR].
Displaying continuous shooting remaining time indicator
(Cont. Shoot. Length)
Sets whether to display an indicator of the
remaining time for which continuous shooting
can be performed at the same shooting speed.
MENU (Camera Settings 2)
[Cont. Shoot. Length] desired setting.
Always Display: Always displays the
indicator when the drive mode is set to
[Cont. Shooting].
Shoot.-Only Display: Displays the indicator only
while continuous shooting is performed.
Not Displayed: Does not display the indicator.
Hint
• When the internal camera memory for buffering is full, “SLOW” will be
displayed and the continuous shooting speed will decrease.
To Next Page
Loading...
Need help?
General
