Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Picture Profile
Allows you to change the settings for the color, gradation, etc. For details on “Picture Profile,” refer to
https://helpguide.sony.net/di/pp/v1/en/index.html.
Customizing the picture profile
You can customize the picture quality by adjusting picture profile items such as [Gamma] and [Detail]. When setting
these parameters, connect the camera to a TV or monitor, and adjust them while observing the picture on the screen.
Using the preset of the picture profile
The default settings [PP1] through [PP10] for movies have been set in advance in the camera based on various shooting
conditions.
MENU →
(Camera Settings1) → [Picture Profile] → desired setting.
PP1:
Example setting using [Movie] gamma.
PP2:
Example setting using [Still] gamma.
PP3:
Example setting of natural color tone using the [ITU709] gamma.
PP4:
Example setting of a color tone faithful to the ITU709 standard.
PP5:
Example setting using [Cine1] gamma.
PP6:
Example setting using [Cine2] gamma.
PP7:
Example setting using [S-Log2] gamma.
PP8:
Example setting using the [S-Log3] gamma and the [S-Gamut3.Cine] under [Color Mode].
PP9:
Example setting using the [S-Log3] gamma and the [S-Gamut3] under [Color Mode].
PP10:
Example setting for recording HDR movies using [HLG2] gamma.
HDR movie recording
The camera can record HDR movies when a gamma from [HLG], [HLG1] to [HLG3] is selected in the picture profile.
Picture profile preset [PP10] provides an example setting for HDR recording. Movies recorded using [PP10] can be
viewed with a wider range of brightness than usual when played back on a TV supporting Hybrid Log-Gamma (HLG).
MENU →
(Camera Settings1) → [Picture Profile] → the profile you want to change.
1
Move to the item index screen by pressing the right side of the control wheel.
2
Select the item to change using the top/bottom sides of the control wheel.
3
Select the desired value using the top/bottom sides of the control wheel and press in the center.
4
To Next Page
Loading...
