Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Setting the method for jumping between images (Image Jump Setting)
Sets which dial and method to use for jumping between images during playback. This function is useful when you want
to find one of many recorded images. You can also quickly find protected images or images set with a particular rating.
Menu item details
Select Dial/Wheel:
Selects the dial or wheel to use for jumping between images.
Image Jump Method:
Sets the method for playing back with Image Jump.
Note
A group is counted as one image when [Image Jump Method] is set to [One by one], [By 10 images], or [By 100 images].
When [Image Jump Method] is set to a parameter other than [One by one], [By 10 images], or [By 100 images], Image Jump will
only be available if [View Mode] is set to [Date View]. If [View Mode] is not set to [Date View], the camera will always play back
every image without jumping when you use the dial selected with [Select Dial/Wheel].
When you use the Image Jump function and [Image Jump Method] is set to a parameter other than [One by one], [By 10 images],
or [By 100 images], movie files are always skipped.
Related Topic
Rating
Protecting images (Protect)
5-021-699-11(1) Copyright 2020 Sony Corporation
MENU →
(Playback) → [Image Jump Setting] → desired item.
1
To Next Page
Loading...
