Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
FINDER/MONITOR
Sets the method for switching the display between the viewfinder and the monitor.
Menu item details
Auto:
When you look into the viewfinder, the eye sensor reacts and the display is switched to the viewfinder automatically.
Viewfinder(Manual):
The monitor is turned off and the image is displayed only in the viewfinder.
Monitor(Manual):
The viewfinder is turned off and the image is always displayed on the monitor.
Hint
You can assign the [FINDER/MONITOR] function to your preferred key.
MENU →
(Camera Settings2) → [ Custom Key], [ Custom Key] or [ Custom Key] → set [Finder/Monitor Sel.] to
the preferred key.
If you want to retain the viewfinder display or the monitor display, set [FINDER/MONITOR] to [Viewfinder(Manual)] or
[Monitor(Manual)] beforehand.
You can keep the monitor off when you take your eyes off the viewfinder during recording by setting the monitor display to
[Monitor Off] using the DISP button. Select MENU →
(Camera Settings2) → [DISP Button] → [Monitor] and add a check
mark to [Monitor Off] beforehand.
Note
When the monitor is flipped out and rotated to the high-angle position, low-angle position, or self-portrait position, the eye sensor
of the camera will not detect your eye approaching even if [FINDER/MONITOR] is set to [Auto]. The image will continue to be
displayed on the monitor.
Related Topic
Assigning frequently used functions to buttons (Custom Key)
DISP Button (Monitor/Finder)
5-021-699-11(1) Copyright 2020 Sony Corporation
MENU →
(Camera Settings2) → [FINDER/MONITOR] → desired setting.
1
To Next Page
Loading...
