Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Sending images to a smartphone (NFC One-touch Sharing)
With just one touch, you can connect this product and an NFC-enabled smartphone, and send an image displayed on
the product screen directly to the smartphone. You can transfer still images, movies and slow-motion and quick-motion
movies.
About “NFC”
NFC is a technology that enables short-range wireless communication between various devices, such as mobile phones
or IC tags, etc. NFC makes data communication simpler with just a touch on the designated touch-point.
NFC (Near Field Communication) is an international standard of short-range wireless communication technology.
Note
You can select an image size to be sent to the smartphone from [Original], [2M] or [VGA].
To change the image size, refer to the following steps.
For an Android smartphone
Start Imaging Edge Mobile, and change the image size by [Settings] → [Copy Image Size].
For iPhone or iPad
Select Imaging Edge Mobile from Settings, and change the image size using [Copy Image Size].
RAW images are converted to JPEG format when they are sent.
Activate the NFC function of the smartphone.
On an iPhone, launch Imaging Edge Mobile, and then select [Connect with the camera through One-touch
(NFC)] under [Connect with a new camera].
1
Display a single image on the product.
2
Touch the (N-Mark) on the camera to the smartphone for 1-2 seconds.
The product and the smartphone are connected, and then the displayed image is sent to the smartphone.
Before you touch the smartphone, cancel the sleep and lock-screen functions of the smartphone.
The NFC function is available only when the
(N-Mark) is displayed on the product.
To transfer two or more images, select MENU →
(Network) → [Send to Smartphone Func.] → [Send to
Smartphone] to select images. After the connection enabled screen appears, use NFC to connect the product
and the smartphone.
3
To Next Page
Loading...
