Connect the camera and the computer via Wi-Fi using a wireless access point. The camera and the computer need to be
paired in advance.
Select MENU→
(Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Set.] to connect the camera to the
wireless access point. Connect the computer to the same wireless access point.
Select MENU →
(Network) → [PC Remote Function] → [Pairing] on the camera, and then use Imaging Edge
Desktop (Remote) to pair the camera and the computer. Select [OK] on the pairing confirmation screen displayed on the
camera to finish pairing.
Pairing information is deleted when you initialize the camera.
Note
When an unrecordable memory card is inserted into the camera, you cannot record still images even if [Still Img. Save Dest.] is
set to [Camera Only] or [PC+Camera].
When [Camera Only] or [PC+Camera] is selected and no memory card is inserted into the camera, the shutter will not be
released even if [Release w/o Card] is set to [Enable].
[RAW+J PC Save Img] can only be selected when [
File Format] is set to [RAW & JPEG].
5-021-699-11(1) Copyright 2020 Sony Corporation
To Next Page
Loading...
