EasyManua.ls Logo

Sony BDV-E470 - Specifications

Sony BDV-E470
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Information
75
US
Specifications
Amplifier Section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R: With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 60 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Other models:
POWER OUTPUT (rated)
Front L/Front R: 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
BDV-E370/BDV-T37:
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
142 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 140 W (at 3 ohms, 80 Hz)
BDV-E870/BDV-E570/BDV-E470/BDV-T57:
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
167 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 W (at 3 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN) Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL), TV (OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
Video Section
Outputs VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19
pin)
BD/DVD/Super Audio CD/CD System
Signal format system NTSC
USB Section
(USB) port: Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Maximum current: 500 mA
LAN Section
LAN (100) terminal 100BASE-TX Terminal
Tuner Section
System PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range
North American models: 87.5 MHz - 108.0 MHz
(100 kHz step)
Other models: 87.5 MHz - 108.0 MHz
(50 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Speakers
Front/Surround (SS-TSB101) for BDV-E570/
BDV-E470/BDV-E370/BDV-T57/BDV-T37
Surround (SS-TSB101) for BDV-E870
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2
1
/4 in ×
3
1
/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 225 mm × 71 mm
(3 in × 8
7
/8 in × 2
7
/8 in)
(w/h/d)
Mass (approx.) 0.45 kg (1 lb)
Front (SS-TSB104) for BDV-E870
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2
1
/4 in ×
3
1
/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 610 mm × 70 mm
(3 in × 24
1
/8 in × 2
7
/8 in)
(w/h/d) (wall-mounted
part)
251 mm × 1,205 mm × 251
mm (10 in × 47
1
/2 in ×
10 in) (w/h/d) (whole
speaker)
Mass (approx.) 0.9 kg (2 lb) (wall-
mounted part)
2.7 kg (6 lb) (whole
speaker)
Center (SS-CTB101)
Speaker system Full range Acoustic
suspension, Magnetically
Shielded
Speaker unit 30 mm × 60 mm (1
3
/16 in ×
2
3
/8 in) cone type
Rated impedance 3 ohms

Table of Contents

Related product manuals