G
Gina ThomasSep 23, 2025
How to fix picture contours that are distorted on Sony LCD TV?
- LLaura StanleySep 23, 2025
To correct distorted picture contours on your Sony LCD TV, change the current setting of CineMotion to other settings.
To Next PageTo Next PageHow to fix picture contours that are distorted on Sony LCD TV?
To correct distorted picture contours on your Sony LCD TV, change the current setting of CineMotion to other settings.
Why is the LED indicator flashing red on my Sony LCD TV?
If the LED indicator on your Sony LCD TV is flashing red, reset the TV by disconnecting the AC power cord for two minutes, then turn it back on. If the issue continues, contact Sony Customer Support and provide the number of times the LED indicator flashes red (interval time is three seconds).
What to do if there is no picture from connected equipment on my Sony LCD TV screen?
If you are not getting a picture from connected equipment on your Sony LCD TV, try the following: 1. Ensure the connected equipment is turned on. 2. Verify the cable connections are secure. 3. Press the INPUT button to display the connected equipment list, then select the correct input. 4. If using a digital still camera, correctly insert the memory card or other storage device. 5. Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera. 6. Note that operations are not guaranteed for all USB devices, and operations may differ depending on the features of the USB device and the video being played.
Why does my Sony LCD TV turn off automatically?
If your Sony LCD TV turns off automatically (enters standby mode), check the following settings: 1. Sleep Timer: See if it is activated. 2. On Timer or Photo Frame Settings: Check if the Duration is activated. 3. Idle TV Standby: Verify if this feature is enabled.
Why are some channels blank on my Sony LCD TV?
Some channels may appear blank on your Sony LCD TV because: * The channel is for a scrambled/subscription service only, so you need to subscribe to a pay TV service. * The channel is used only for data (no picture or sound). * You may need to contact the broadcaster for transmission details.
What to do if my Sony LCD TV has no picture or no menu information from equipment connected to the video input jack?
If there is no picture or menu information from equipment connected to the video input jack on your Sony LCD TV: * Press INPUT to display the connected equipment list, then select the desired input. * Check the connection between the optional equipment and the TV.
What to do if the desired channel cannot be selected on my Sony LCD TV?
If the desired channel cannot be selected on your Sony LCD TV, switch between digital and analogue mode and select the desired digital/analog channel.
What causes double images or ghosting on my Sony LCD TV?
If you are experiencing double images or ghosting on your Sony LCD TV, check the cable and antenna connection, location, or direction.
What to do if HDMI/MHL equipment does not appear on BRAVIA Sync Device List on my Sony LCD TV?
If your HDMI/MHL equipment does not appear on the BRAVIA Sync Device List of your Sony LCD TV, ensure that your equipment is compatible with BRAVIA Sync Control.
What to do if my Sony LCD TV shows only snow and noise on the screen?
If your Sony LCD TV screen displays only snow and noise, check if the antenna is broken or bent. Also, check if the antenna has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside).
General| Screen Size | 48 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Smart TV | No |
| Motionflow XR | Motionflow XR 120 |
