To Next PageTo Next PageWhat to do if my Sony BRAVIA KDL-48W700 has no picture and no sound?
If your Sony TV screen is dark and there is no sound, check the cable or antenna connection. Also, ensure the TV is connected to AC power and press the power button on the TV or the remote control.
What to do if my Sony BRAVIA KDL-48W700 has frozen audio or video, a blank screen, or doesn't respond to the remote?
If your Sony TV is experiencing frozen audio or video, shows a blank screen, or isn't responding to the TV or remote control buttons, perform a simple reset. Unplug the AC power cord (mains lead) from the TV for two minutes, then plug it back in.
How to reset Sony TV when the Illumination LED is flashing red?
If the Illumination LED on your Sony TV is flashing red, reset the TV by disconnecting the AC power cord (mains lead) from the TV for two minutes, and then turn the TV back on. If the issue persists, contact your dealer or Sony service center and provide the number of times the Illumination LED flashes red.
How to fix a Sony BRAVIA KDL-48W700 when the illumination LED is flashing red?
If the illumination LED on your Sony TV is flashing red, try resetting the TV. Disconnect the AC power cord from the TV for two minutes, and then turn the TV back on.
Why is my Sony TV remote control not working?
If your Sony TV remote control isn't working, the first thing to try is replacing the batteries.
Why is my Sony BRAVIA KDL-48W700 TV not tuning to all channels?
If your Sony TV is unable to tune to some programs, check the cable or antenna connection.
Why do the surrounds of my Sony TV become warm?
When the Sony TV is used for an extended period, the TV surrounds become warm. This is normal.
What to do if my Sony TV screen is blank and it is unresponsive?
If your Sony TV is frozen, showing a blank screen, or not responding to the remote or TV buttons, try a simple reset. Unplug the TV's AC power cord for two minutes, and then plug it back in.
What to do if I cannot find the required network name in network setup on my Sony BRAVIA KDL-48W700?
If you cannot find the required network name in the network setup of your Sony TV, select [[Manual Entry]] and press the enter button to manually enter the network name.
What to do if there is no picture and no sound on my Sony BRAVIA KDL-48W700 TV?
If your Sony TV screen is dark and there is no sound, check the antenna (aerial)/cable connection. Also, ensure the TV is connected to the AC power (mains) and press the power button (?/?) on the TV or remote control.
General