Why won't my Sony BRAVIA VPL-HW10 Projector power on?
If your Sony Projector won't power on, try the following: * Wait about 1 minute, then try turning the power on again. * Ensure the lamp cover is securely closed and the screws are tightened. * Make sure the filter holder is securely closed. * Check the warning indicators.
Why is the picture from the VIDEO INPUT or S VIDEO INPUT connector colored strange on my Sony BRAVIA VPL-HW10?
If the picture from the VIDEO INPUT or S VIDEO INPUT connector on your Sony Projector is colored strangely, try adjusting the picture settings in the Picture menu. Also, set "Color System" in the Setup menu to match the color system being input.
How to fix Sony BRAVIA VPL-HW10 picture flickers?
If the picture on your Sony Projector flickers: * For pictures from a computer, activate "APA" and adjust the current input signal. * Adjust "Phase" for "Adjust Signal" in the Screen menu.
What to do if my Sony Projector picture is too dark?
If the picture on your Sony Projector is too dark, adjust the "Contrast" or "Brightness" in the Picture menu.
Why is my Sony BRAVIA VPL-HW10 Projector picture not clear?
If the picture on your Sony Projector is not clear, it could be due to condensation on the lens. To resolve this, leave the projector powered on for about 2 hours.
What to do if Sony BRAVIA VPL-HW10 Projector shows 'Please clean the filter. Have you finished? Yes No'?
If your Sony Projector displays 'Please clean the filter. Have you finished? Yes No', clean the air filter.
What to do if Sony BRAVIA VPL-HW10 shows 'Please clean the filter.'?
If your Sony Projector displays 'Please clean the filter', clean the air filter.
What to do if my Sony Projector shows 'Please replace the Lamp/ Filter.'?
If your Sony Projector displays the message 'Please replace the Lamp/ Filter', you should replace the lamp and the air filter. Also, restart cleaning the ventilation holes (intake).
Why is there no picture on my Sony BRAVIA VPL-HW10 Projector?
If there is no picture on your Sony Projector, check the following: * Ensure that the proper connections have been made. * Select the correct input source using the INPUT button. * Set the computer signal to output from an external monitor or only to an external monitor. * Select "Computer," "Component" or "Video GBR" for "Input-A Signal Sel." on the Setup menu according to the input signal.
General| Resolution | 1920 x 1080 |
|---|---|
| Display Technology | SXRD |
| Zoom Ratio | 1.5x |
| Lamp Life | 2000 hours (high mode), 3000 hours (low mode) |
| Input Terminals | HDMI, Component, Composite |
| Projection Size | 40 to 200 inches |
| Contrast Ratio | 30, 000:1 (dynamic) |
Safety precautions for operating the projector, including voltage and liquid exposure.
Advice on preventing overheating and ensuring proper ventilation for the projector.
Instructions for safely repacking the projector using original materials.
Identifies buttons and indicators on the projector's front and right side panels.
Illustrates ventilation holes, lamp cover, and filter holder.
Details the function of each button on the projector's remote control.
Guides on unpacking, inserting batteries, and handling the remote.
Instructions for suitable and unsuitable installation locations.
Procedures for connecting video sources like VCRs, DVD players, and computers.
Steps to adjust picture position using lens shift, zoom, and focus.
Guide to changing the on-screen display language.
Steps to power on, select input, and display the picture.
Instructions on how to properly turn off the projector.
Explains wide screen modes and picture viewing modes.
Guide on using the remote control to adjust picture parameters.
Explains functions like Muting, APA, and Freeze.
General guidance on navigating and operating the projector's on-screen menu system.
Details on Picture, Screen, Setup, Function, Installation, and Information menus.
Accessing device information and understanding preset signal compatibility.
Remedies for common issues like power, picture, display, and remote control malfunctions.
Steps for replacing lamp/filter, cleaning ventilation, and general projector care.
Instructions for cleaning the lens, cabinet, and maintaining the projector's condition.
Detailed technical data including dimensions, power, and signal compatibility.
Information on power connection, accessories, and ceiling installation support.
Guidance for mounting the projector on a ceiling with measurements for support.
Provides top view measurements for attaching the PSS-H10 projector suspension support.
To Next Page
