Need help?Do you have a question about the Sony Bravia VPL-VW40 and is the answer not in the manual?
General| Display Technology | SXRD |
|---|---|
| Native Resolution | 1920 x 1080 |
| Contrast Ratio | 15, 000:1 |
| Lamp Type | UHP |
| Lamp Life | 2000 hours |
| Projection Size | 40" to 300" |
| Inputs | HDMI, Component, Composite, S-Video |
Essential safety guidelines for operating the projector, covering voltage and handling.
Instructions to ensure adequate ventilation and prevent internal heat build-up.
Steps for powering on the projector and entering standby mode.
Guide for using the LENS button and arrow keys to adjust vertical picture alignment.
Steps to power on the projector and select the input source for display.
Detailed steps for adjusting the vertical picture position using the LENS button.
Explains how to adjust the picture's vertical position up to 65% of screen size.
Guide for using the LENS button and arrow keys to adjust the picture's zoom level.
Steps for using the LENS button and arrow keys to achieve sharp focus.
Steps to power on the projector and connected equipment, then select the input source.
Explains how to use buttons for Color Space, Color Temp, Black Level, Gamma, and Iris.
How to cycle through and adjust settings like Contrast, Brightness, and Color using ADJ PIC.
Guide to adjusting specific colors and hues using the Real Color Processing feature.
Adjusting color position, range, and hue for specific parts of the image.
Controls the iris for optimal brightness and contrast based on scene.
Options for adjusting lamp wattage (High, Low) for brightness and fan noise.
How to adjust the white level and overall brightness of the picture.
Controls for picture color intensity and color tone.
Options for adjusting color temperature (High, Middle, Low, Custom).
How to adjust picture sharpness or reduce noise.
Settings for reducing picture noise and enhancing dynamic detail.
Options to adjust black levels for a bolder, more dynamic picture.
Adjusts tone response characteristics with Gamma1, Gamma2, Gamma3 settings.
Adjusts color and hue of selected picture portions independently.
Options to convert color range to Normal (Hi-Vision) or Wide.
Solutions for power not turning on or no picture being displayed.
Troubleshooting steps for incorrect colors from specific inputs.
Solutions for dark pictures, unclear images, and flickering.
Fixes for missing on-screen displays or non-functional remote controls.
Interprets flashing red LAMP/COVER lights related to lamp life or temperature.
Explains ON/STANDBY light patterns indicating fan failure or high internal temperature.
Lists common warning messages (e.g., High temp, Replace Lamp/Filter) and their solutions.
Tools needed and initial steps before replacing the projector lamp and air filter.
Steps for loosening screws, removing the lamp cover, and detaching the filter holder.
Instructions on how to carefully remove the air filter from its holder.
Steps for attaching the new air filter, filter holder, and securing the lamp.
Steps to place the projector back, turn it on, and confirm lamp replacement in setup.
To Next Page
