Need help?Do you have a question about the Sony VPL-ES4 and is the answer not in the manual?
General| Matrix size | 0.63 \ |
|---|---|
| Heat dissipation | 750.7 BTU/h |
| Projection distance | - m |
| Projection technology | LCD |
| Contrast ratio (typical) | - |
| Screen size compatibility | - \ |
| Projector native resolution | SVGA (800x600) |
| Lamp type | UHP |
| Lamp power | 165 W |
| Light source type | Lamp |
| Service life of light source | - h |
| Focal length range | 18.8 - 22.6 mm |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 308 x 267 x 98 mm |
| Power requirements | AC100 - 240V, 50/60 Hz |
| Connectivity technology | Wired |
| Full HD | No |
| Analog signal format system | PAL, SECAM |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 220 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 35 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 35 - 85 % |
| Product color | Black |
| Noise level | - dB |
Weight and Dimensions| Weight | 3000 g |
|---|
Identifies external appearance and internal component locations of the projector.
Step-by-step guide for disassembling projector components like cases and boards.
Instructions for removing internal parts like power supply, power board, and optics section.
Guidance on using correct power cords and understanding voltage/current ratings.
Lists initial settings for various picture and input adjustment parameters.
Explains the internal memory organization for settings and data.
Diagnostic flowchart for identifying and resolving electrical issues.
Specific guides for diagnosing power issues and lamp turn-on failures.
Guidance on safety, standardization, and stock availability of repair parts.
Diagrams and lists of projector components and their part numbers.
Details of supplied accessories and packing materials included with the product.
A comprehensive diagram illustrating the projector's internal circuitry and signal flow.
Schematic diagram showing the functional blocks and connections within the projector.
Instructions for performing AC leakage tests on the projector after servicing.
To Next Page
