What to do if my Sony VPL-ES1 power is not turning on?
If your Sony Projector is not turning on, wait for about 90 seconds before turning it on again if the power was recently turned off and on. Also, ensure that the lamp cover is securely closed.
How to fix blurry picture on Sony VPL-ES1?
If the picture on your Sony Projector is not clear, adjust the focus. If condensation has occurred on the lens, leave the projector on for about two hours.
How to adjust the image size on my Sony VPL-ES1 Projector if it extends beyond the screen?
If the image extends beyond the screen on your Sony Projector, and there are black edges around the image, display the full image on the screen and press the APA key. You can also adjust the Shift settings in the INPUT SETTING menu.
How to fix no picture on Sony Projector?
If there is no picture on your Sony Projector, ensure all cables are properly connected. If they are not, make the proper connections. Select the correct input source using the INPUT key. Also, ensure the computer signal is set to output only to an external monitor.
How to troubleshoot no sound on Sony VPL-ES1 Projector?
If there is no sound coming from your Sony Projector, check all cable connections to ensure they are correct. Make sure you are using a no-resistance stereo audio cable. Finally, check and adjust the sound settings on the projector.
Why is my Sony Projector Remote Commander not working?
If the Remote Commander for your Sony Projector is not working, replace the batteries with new ones.
What does it mean when the LAMP/COVER indicator lights up on my Sony Projector?
If the LAMP/COVER indicator lights up on your Sony Projector, it could mean the lamp has reached the end of its life and needs to be replaced. It could also indicate that the lamp is overheating; in that case, wait 90 seconds for it to cool down before turning the power back on.
How to fix picture flickering on Sony VPL-ES1 Projector?
If the picture flickers on your Sony Projector, adjust the Dot Phase in the INPUT SETTING menu.
How to reduce noise in the picture on my Sony VPL-ES1?
If the picture on your Sony Projector is noisy, change the desktop pattern on the connected computer.
What does it mean when the LAMP/COVER indicator is flashing on my Sony VPL-ES1 Projector?
If the LAMP/COVER indicator is flashing on your Sony Projector, make sure the lamp cover is securely attached. If the lens protector does not open due to a problem, consult with qualified Sony personnel. If it is necessary to use the projector in case of emergency, use it in the emergency mode.
Projection System| projection system | 3 LCD panels, 1 lens projection system |
|---|---|
| projection lens | 1.2 times F2.2 to 2.4 f18.0 to 21.6mm |
| lamp | 185W UHP |
Screen and Resolution| screen coverage | 40'' to 150'' |
|---|---|
| light output | 1500 ANSI lm |
| resolution video | 600 TV lines |
Throwing Distance| 40-inch throwing distance | 1.1 to 1.4 m |
|---|---|
| 60-inch throwing distance | 1.7 to 2.1 m |
| 80-inch throwing distance | 2.3 to 2.8 m |
Power| power requirements | AC 100 to 240 V, 50/60 Hz |
|---|---|
| power consumption max | 250 W |
| standby power consumption | 4.6 W |
Operating Environment| operating temperature | 0 to 35 degrees Celsius |
|---|---|
| operating humidity | 35% to 85% |
| heat dissipation | 853.1 BTU |
Weight and Dimensions| weight kg | Approx. 2.8 kg |
|---|---|
| weight lb | Approx. 6 lbs., 3 oz. |
| dimensions (WxHxD) mm | 295 x 78 x 238 |
Safety guidelines for operation, installation, and cleaning to prevent hazards and ensure optimal performance.
Guidelines on suitable and unsuitable installation locations and conditions to prevent malfunction or damage.
Highlights key functionalities like high brightness, high resolution, intelligent auto-setup, and short focus lens.
Provides a table guiding the optimal distance between the lens and the screen based on screen size.
Instructions and illustrations for connecting the projector to various external devices like computers and VCRs.
Step-by-step guide on how to change the menu and on-screen display language from the projector's settings.
Instructions on turning on the projector, connecting equipment, and adjusting picture settings like input source, tilt, zoom, and focus.
Explains features like Digital Zoom and Freeze function for enhancing presentations.
General guide on navigating the projector's on-screen menu system to make adjustments and settings.
Details on adjusting picture parameters like Picture Mode, Contrast, Brightness, Color, Hue, and Sharpness.
Covers settings related to input signals, including aspect ratio (Wide Mode) and scan converter options.
Step-by-step instructions for safely replacing the projector lamp, including necessary precautions.
Guide on how to clean or replace the air filter to maintain optimal performance and prevent overheating.
A guide to diagnose and resolve common operational issues with power, picture, sound, and remote commander.
Explains various warning messages displayed by the projector and their corresponding remedies.
Instructions on how to manually operate the lens protector and tilt adjuster in emergency situations.
Technical specifications of the projector, including optical, electrical, input/output, and general characteristics.
To Next Page
