Sony BVM-E250 Interface Manual For Programmers

VMC Command Description
10
Ethernet
Command
Enter the setting value in [Value] (do not enter [ ].)
Function Command Name Command Send (Ethernet t Monitor)
SDCP (Ethernet
Command) V0.2
Button CONTROL INFObutton MENU Display/non-display the menu.
INFObutton MENUUP Moves the menu item upward.
INFObutton MENUDOWN Moves the menu item downward.
INFObutton MENUENT Confirms the menu item.
Input Config STATset INPUTSEL CVBS Selects the composite input.
STATset INPUTSEL SDI Selects the SDI input.
STATset INPUTSEL HDMI Selects the HDMI input.
STATset WBSEL LOW Selects COLOR TEMP D65.
STATset WBSEL HIGH Selects COLOR TEMP D93.
STATset WBSEL USER Selects COLOR TEMP USER.
Control Data STATset CONTRAST [Value] Sets the contrast level.
Adjustable range is 0 to 100.
STATset APERTURE [Value] Sets the aperture level.
Adjustable range is 0 to 6.
STATset BRIGHTNESS [Value] Sets the brightness level.
Adjustable range is 0 to 100.
STATset PHASE [Value] Sets the phase level.
Adjustable range is 0 to 100.
STATset CHROMA [Value] Sets the chroma level.
Adjustable range is 0 to 100.
STATset VOLUME [Value] Sets the volume level.
Adjustable range is 0 to 100.
Display Data STATset RESET Resets the setting to the factory setting.
STATset SHIFTH [Value] Sets the H shift.
Adjustable range is +30 to -30.
STATset SHIFTV [Value] Sets the V shift.
Adjustable range is +30 to -30.
I/P Mode STATset MODE0 Sets I/P MODE to INTER-FIELD.
STATset MODE1 Sets I/P MODE to FIELD MERGE.
STATset MODE2 Sets I/P MODE to LINE DOUBLER.
Select Offset STATset NTSC0 Sets the NTSC setup level to 0.
STATset NTSC75 Sets the NTSC setup level to 7.5.
STATset RGB RANGE FULL Sets RGB RANGE to FULL.
STATset RGB RANGE LIMITED Sets RGB RANGE to LIMITED.
On Switch Function STATset REMOTE ON Sets the remote to ON.
STATset POWERSAVING ON Sets POWER SAVING to ON.
STATset KEYINHIBIT ON Sets KEY INHIBIT to ON.
STATset TALLYGREEN ON Sets the tally green to ON.
STATset TALLYRED ON Sets the tally red to ON.
STATset HVDELAY ON Sets the H/V delay function to ON.
STATset BLUEONLY ON Sets BLUE ONLY to ON.
STATset MONOCHR ON Sets MONO to ON.
STATset CAMERA FOCUS ON Sets the camera focus function to ON.
STATset LED ON Sets the front panel LED to ON.
STATset SCREENSAVER ON Sets SCREEN SAVER to ON.
STATset SILENTMODE ON Sets SILENT MODE to ON.
STATset FLIPH ON Sets FLIP H to ON.
STATset FLIPV ON Sets FLIP V to ON.
STATset FLIPHV ON Sets FLIP HV to ON.
Off Switch Function STATset REMOTE OFF Sets the remote to OFF.
STATset POWERSAVING OFF Sets POWER SAVING to OFF.

Sony BVM-E250 Specifications

General

Brand	Sony
Model	BVM-E250
Category	Monitor
Language	English