12
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
• After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.
To remove the battery pack
Open the battery cover. Slide the battery
eject lever in the direction of the arrow, and
remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or viewing
time.
• The black portion of the battery remaining
indicator in the illustration shows the actual
remaining time.
• The displayed remaining time may not be
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC Adaptor at
a temperature of 25°C (77°F).
4
Power cord
(mains lead)
AC Adaptor
2 To wall outlet (wall socket)
1
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
NP-FM50 (supplied) Approx. 150
4
101
M AF
5.0M
60min
To Next Page
Loading...
