To Next PageTo Next PageWhat to do if the /CHG lamp flashes when charging Sony Digital Camera battery?
If the /CHG lamp flashes when charging a battery pack for your Sony Digital Camera, ensure the battery pack is installed correctly. If the issue persists, the battery pack may have malfunctioned; consult your Sony dealer or local authorized Sony service facility.
Why does the flash not work on my Sony Digital Camera?
If the flash on your Sony Digital Camera isn't working, ensure the mode dial is set to , or (Clip Motion). Also, check if the flash is set to (No flash); if so, set it to Auto (No indicator) or (Forced flash). If the (Twilight mode) is selected for the Scene Selection function, set it to other settings. If (High-speed shutter mode), (Beach mode), (Snow mode) or (Landscape mode) is selected for the Scene Selection function, set the flash to (Forced flash). If [Moving Image] in the SET UP settings is set to [MPEG Movie] or [Multi Burst], set it to [Clip Motion]. If [Mode] (REC Mode) in the menu settings is set to [Burst 2], set it to other settings.
Why can't I charge the battery on my Sony CD Mavica MVC-CD350?
You may not be able to charge the battery pack of your Sony Digital Camera if the camera is turned on. Turn the camera off.
Why is the image too dark on my Sony CD Mavica MVC-CD350?
If the image appears too dark on your Sony Digital Camera, it could be because you are shooting a subject with a light source behind it. Try adjusting the exposure. Another reason could be that the brightness of the screen is too low; adjust the brightness of the LCD screen.
Why is the image too bright on my Sony CD Mavica MVC-CD350?
If the image appears too bright on your Sony Digital Camera, it could be because you are shooting a spotlighted subject in a dark location. Try adjusting the exposure. Another reason could be that the brightness of the LCD screen is too bright; adjust the brightness of the LCD screen.
How to fix out of focus image on Sony CD Mavica MVC-CD350 Digital Camera?
If your Sony Digital Camera images are out of focus, it might be because the subject is too close. Try recording in the macro recording mode and ensure the lens is farther from the subject than the shortest shooting distance. Also, if the (Twilight mode) or (Landscape mode) is selected for the Scene Selection function, set it to other modes. Finally, if the focus preset function is selected, cancel the function.
Why subject is not visible on Sony CD Mavica MVC-CD350 screen?
If the subject is not visible on the screen of your Sony Digital Camera, the mode dial is not set to,, SCN or . Set it to,, SCN or .
What to do if /CHG lamp does not light up when charging Sony Digital Camera battery?
If the /CHG lamp does not light up when charging a battery pack for your Sony Digital Camera, make sure the AC Adaptor is properly connected. Also, verify that the battery pack is installed correctly. The battery pack may also be completely charged.
Why is my Sony CD Mavica MVC-CD350 Digital Camera battery indicator incorrect?
The battery indicator on your Sony Digital Camera might be incorrect if you have used the camera for a long time in an extremely hot or cold location. Replace the battery pack with a new one. Also, the battery pack might be dead, so install a charged battery pack. If the battery pack is discharged, fully charge it. A deviation may have occurred in the remaining battery time.
Why does my Sony Digital Camera battery drain so fast?
Your Sony Digital Camera battery might be draining quickly because you are shooting or viewing images in an extremely cold location. Try charging the battery pack. Alternatively, the battery pack may not be charged enough, or it might be dead. Consider replacing it with a new one.
General| Brand | Sony |
|---|---|
| Model | CD Mavica MVC-CD350 |
| Category | Digital Camera |
| Language | English |
Details the process of charging the camera's battery pack for operation.
Explains how to power the camera on and off, including auto power-off.
Covers fundamental steps for taking still photographs using auto modes.
Describes how to view photos directly on the camera's LCD screen.
Guide on transferring images via USB, including software installation.
Solves issues related to battery charging, installation, and power.
Addresses problems encountered during image or movie shooting.
Troubleshoots issues related to computer compatibility and connectivity.
