20
Setting the still image size
, Set the mode dial to and
turn on the power.
• You can also carry out this operation when the
mode dial is set to or SCN.
, Press (Image Size).
The Image Size setup appears.
• For details on the image size, see page 21.
, Select the desired image size
with v/V on the control button.
The image size is set.
When the setting is complete, press
(Image Size) so that the Image Size setup
disappears from the LCD screen.
• The image size selected here is maintained even
when the power is turned off.
1
Mode dial
2
VGA
1.2M
2.0M
2.8M(3:2)
3.1M
3.1M
Image Size
3
VGA
1.2M
2.0M
2.8M(3:2)
3.1M
VGA
Image Size
To Next Page
Loading...
