Sony CDP-101 - Disc Table Stopper Adjustment

CDP-101
Disc Table Stopper Adjustment
This adjustment is to prevent the disc table from
coming forward due to loading gear backrush when
the disc table is closed and chucking completed.
Apply a lecking compound.
Stopper spring plate
stopper spring plate
lock arm
Apply locking compound.
lock cum
stopper plate stopper adjustment screw
pper PISS '(B3 x 14)
clearance @
0.7 —0.2mm
Adjust with the stopper adjustment screw so that
clearance (@) is 0.1—0.2 mm when the disc table is
closed. ;
After adjustment, lock the stopper spring plate
and stopper adjustment screw. (Do not get lock on
the stopper plate.)
=) =