— 4 —
HOW TO OPEN THE DISC TRAY WHEN POWER
SWITCH TURNS OFF
Insert a tapering driver into the aperture of the unit bottom, and turn in
the direction of arrow (to OUT direction).
* To close the disc tray, turn the driver in the reverse direction
(to IN direction).
Tray
NOTE FOR MAIN GEAR INSTALLATION
5
Stopper washer (5)
4
Install the MAIN GEAR
as show in the drawing.
2
Slide the SET LEVER to the
arrow
B
direction.
1
Set the mark of
ROTARY ENCODER.
A
3
Rotate the GEAR (U/D)
to the arrow
A
direction.
B
IN
OUT
To Next Page
Loading...
