Sony CDP-C160Z - Section 2 Disassembly; 2-1. Case, Bottom Plate and Front Panel; 2-2. Back Panel and Disc Table

— 6 —
SECTION 2
DISASSEMBLY
2-2. BACK PANEL AND DISC TABLE
!¢ Disc table (B)
!∞ Disc table (A)
!¡ Screw
(BVTP3 × 8)
!™ Bracket
(guideB1)
9 Screw
(BVTP3 × 8)
0 Bracket (guide F1)
8 Bracket (guide F1)
7 Screw (BVTP3 × 8)
5 Screw
(BVTP3 × 8)
6 Bracket (guide B1)
4 Flat type wire (6 core)
(MAIN board, to CN404)
1 Connector
2 Five screws
(BVTP3 × 10)
3 Back panel
!£ Screw
(PTPWH3 × 12)
Note : Follow the disassembly procedure in the numerical order given.
2-1. CASE, BOTTOM PLATE AND FRONT PANEL
1 Two screws
(M3 × 8)
9 Flat type wire (9 core)
(MAIN board, to CN402)
!º Two screws
(BVTT3 × 8)
!™ Front panel
4 Case
3 Two screws
(BV3 × 8)
2 Two screws
(M3 × 8)
8 Flat type wire (35 core)
(MAIN board, to CN402)
7 Bottom plate
5 Four screws
(BVTP3 × 10)
!¡ Three screws
(BVTP3 × 10)
6 Three screws
(BVTP3 × 10)