Sony CDP-C435 - Playing Discs - Continuous Play; Playing From the First Selection

RF PLL Free-run Frequency Check
Procedure :
1. Connect frequency counter to test point (PLCK)
with lead wire.
BD
board
frequency
counter
CoN eae |
TP (PLCK) T=
2. Turn Power switch on.
3. Confirm that reading on frequency counter is
4. 3218MHz.
Focus/Tracking Gain
This gain has a margin, so even if it is slightly off.
There is no problem.
Therefore, do not perform, this adjustment.
Please note that it should be fixed to mechanical cen-
ter position when you moved and do not know
original position.
Adjustment Locations:
[BD BOARD] —Conductor Side — [MAIN BOARD] —Component Side —