Sony CDP-CX200 - Adjustments (Continued); Guide (Disc T) Alignment

— 15 —
GUIDE (DISC T) ALIGNMENT
(1)Rotate the cam and adjust to the position
shown in the figure.
(2)Check that the state is as shown in the
figure.
(4)Move the holder (guide T) with a tapering screwdriver, and
set the position of the guide (disc T) to A:B=1:1.
(3)Loosen the fixed screw by about 60 °.
Guide (disc T)
Cam
Holder (guide T)
Fixed screw
Disc
Guide (disc T)
A
B
Disc
Holder
(guide T)
Tapering screwdriver
Cam
Guide (disc T)
Holder (guide T)