Sony CDP-CX200 - Adjustments (Continued); Holder (Disc A) Alignment

— 16 —
HOLDER (DISC A) ALIGNMENT
(1)Rotate the cam and adjust to the position
shown in the figure.
(3)After applying screw-lock to the part, rotate the thrust screw until the holder (Disc A) comes to the center of the disc.
Cam
Thrust
screw
Cam
Disc
Disc
Holder (disc A)
Thrust screw
Holder (disc A)
0–1 mm
(2)Check that the state is as shown in the
figure.
Holder (disc A)
1234
1234
1234