Sony CDP-D12 - Remote Control Unit

19
Remote control unit
1 Control S output connector (mini jack)
To use the supplied remote control unit as a wired
remote control unit, connect this connector to the
CTRL-S IN connector on the main unit with the
supplied control S cable.
Note
When the control S cable is connected to the control S
output connector, infrared emission from the remote
control unit is disabled. To use the remote control unit
as a wireless remote control unit, be sure to disconnect
the control S cable from both the control S output
connector and the CTRL-S IN connector on the player.
2 DISPLAY button
Press to change the information in the display.
3 MUSIC SCAN button
Press to play a portion of the beginning of each track.
4 A.CUE A.PAUSE button
Press to select Auto Cue, Auto Pause, or normal play.
5 MARK button
Press to set a point within a track to be cued to by the
LOCATE button.
6 LOCATE button
Press to cue to and pause at the point set by the MARK
button.
1 Control S output connector
2 DISPLAY button
3 MUSIC SCAN button
4 A.CUE A.PAUSE button
5 MARK button
6 LOCATE button
7 Vari Speed Play operation buttons
8 X button
9 x button
0 m/M buttons
qa SLOW m/M buttons
qs ./> buttons
qd H button
qf Repeat Play operation buttons
qg Program Play operation buttons
qh >20 button
qj Numeric buttons
qk PLAY MODE buttons