12
CDX-F5550
2-349-097-11 (1)
H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left
*1 When the unit is turned off.
*2 When the unit is turned on.
*3 When FM is received.
*4 When the audio output is set to “SUB.”
Using optional equipment
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
Skipping groups and discs
1 During playback, press (1)/(2) (GP/DISC)
–/+.
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select “REP-
OFF” or “SHUF-OFF.”
Tip
“SHUF-ALL” will not shuffle tracks between CD units
and MD changers.
Labelling a disc
When you play a disc in a CD changer with the
CUSTOM FILE function, you can label each
disc with a custom name up to 8 characters (Disc
Memo).
If you label a disc, the name appears on the list.
1 While playing a disc that you want to
label, press and hold (LIST).
2 Press the volume +/– button
repeatedly until the desired character
appears.
The character changes as follows.
A y B y C ... y 0 y 1 y 2 ... y +
y – y
... y (blank space) y A
To move the digital indication, press (SEL).
Repeat this operation until the entire name is
entered.
3 Press and hold (LIST).
The labelling is complete and the display
returns to normal play mode.
To display the name, press (DSPL) during
playback.
Tips
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-TRACK” and all shuffle play are suspended
until the labelling is complete.
With the card remote commander
In step 2, to select the character, press M or m.
Deleting the custom name
1 Select the unit that has stored the custom name
you want to delete, then press and hold
(LIST).
2 Press and hold (DSPL) .
The stored name will flash.
3 Press the volume +/– button repeatedly to
select the name you want to delete.
4 Press and hold (SEL).
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST).
The unit returns to normal play mode.
LPF*
4
(Low Pass Filter)
To select the cut-off frequency “78HZ,”
“125HZ” or “OFF” (
z).
To skip Press (1)/(2)
group and release (hold for a
moment).
group
continuously
within 2 seconds of first
releasing.
discs repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
Select To play
REP-DISC*
1
disc repeatedly.
SHUF-
CHGR*
1
tracks in the changer in random
order.
SHUF-ALL*
2
tracks in all units in random
order.
Disc number Unit number
To Next Page
Loading...
