16GB
Connection
*1 Not supplied
*2 Speaker impedance: 4 – 8 × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*5 Depending on the type of car, use an adaptor (not
supplied) if the antenna connector does not fit.
*
2
from a wired remote control
(not supplied)*
4
For details, see “Making
connections” (page 17).
*
3
*
3
Subwoofer*
1
Power amplifier*
1
from a car antenna (aerial)*
5
See “Power connection diagram” (page 17)
for details.
To Next Page
Loading...
