9
CDX-GT40W/GT400/GT450/GT450S
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B Volume control dial/select button 9
To ad ju s t volume (rotate); select setup items
(press and rotate).
C Receptor for the card remote
commander
D COLOR button
To se l e c t one of 7 colour settings for the
LCD.
E Display window
F DSO button 2
To se l e c t the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
G OPEN button
5
CDX-GT450S
CDX-GT450
RESET
OFF
DSPL
SCRL
SEL
SOURCE
MODE
132
465
AT T
VO L
+
–
+
–
qs
wg
qd
1
ws
q;
wf
wd
wh
wk
wj
7
H GP*
1
/ALBM*
2
+/– buttons*
3
To sk i p groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To sk i p tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tun e in stations automatically (press); find
a station manually (press and hold).
J DSPL (display) button 8
To ch ange display items.
K BTM button 8
To st art the BTM function (press and hold).
L SOURCE button
To power on; change the source (Radio/CD/
MD*
4
/AUX).
M MODE button 8, 10
To sel e ct the radio band (FM/AM)/select the
unit*
5
.
N SENS button
To im p rove we a k reception: LOCAL/
MONO.
O Frequency select switch (located on the
bottom of the unit)
See “Frequency Select switch” in the
supplied installation/connections manual.
P Number buttons
CD/MD*
4
:
(3): REP 8
(4): SHUF 8
(5): BBE MP*
6
2
To act ivate the BBE MP function, set
“BBEMP-ON.” To cancel, set
“BBEMP-OFF.”
(6): PA U S E *
6
To pause playback. To cancel, press
again.
Radio:
To re c e ive stored stations (press); store
stations (press and hold).
Q EQ3 (equalizer) button 9
To se l e ct an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
R AUX input jack 10
To co nnect a portable audio device.
S RESET button 4
T Z (eject) button 5
To eject the disc.
U Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
ws < (.)/, (>) buttons
To cont r ol CD/radio, the same as (SEEK)
–/+ on the unit.
wd VOL (volume) +/– button
To adj u st volume.
wf ATT (attenuate) button
To att enuate the sound. To cancel, press
again.
wg SEL (select) button
The same as the select button on the unit.
wh M (+)/m (–) buttons
To con t rol CD, the same as (GP/ALBM) +/–
on the unit.
wj SCRL (scroll) button
To scroll the display item.
wk Number buttons
To rec e ive stored stations (press); store
stations (press and hold).
*1
When an ATRAC CD is played.
*2
When an MP3/WMA is played.
*3
If the changer is connected, the operation is
different, see page 10.
*4
When an MD changer is connected.
*5
When a CD/MD changer is connected.
*6
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
• LOCATION OF CONTROL (CDX-GT450/GT450S)
• CONNECTIONS (CDX-GT450/GT450S)