4
Location of controls
Refer to the pages listed for details.
a Volume +/– button
b ATT (attenuate) button 13
c DSPL (display mode change) button
8, 10
d OPEN/EJECT shutter 9
e Display window
f EQ3 button 15
g OFF (Stop/Power off) button* 7, 9
h SEEK +/– button
Radio:
To tune in stations automatically/find a
station manually.
CD:
To skip tracks/fast-forward, reverse a track.
i (front panel release) button 7
j SOURCE (Power on/Radio/CD) button
To select the source.
k MODE button
To change the operation.
l SEL (select) button
To select items.
m RESET button (located on the front side of
the unit, behind the front panel) 7
n Number buttons 14
To store the desired station on each number
button.
o Frequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
Installation/Connections manual.
p SENS/BTM button 11, 12
q REP button 10
r SHUF button 10
s Receptor for the card remote
commander
* Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
DSPL
EQ3
ATT OFF
SOURCE MODE
SEL
SEEK
123456
SENS
BTM
CDX-R3000
SHUFREP
To Next Page
Loading...
Need help?
General
