EasyManua.ls Logo

Sony CFD-646 - Specifications; Audio Power and System Details

Sony CFD-646
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Information
CFD-646/656.E.3-856-825-1X.U/CA
30
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 3.2-ohm loads, both channel driven
from 150 – 8,000 Hz; rated 4 W per channel-
minimum RMS power, with no more than
10 % total harmonic distortion in AC
operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 – 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.6 – 108 MHz
AM: 531 – 1,602 kHz (Australian model)
530 – 1,710 kHz (Other models)
Aerials
FM: Telescopic aerial
AM: External aerial terminal
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 140 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 80 – 10,000 Hz
General
Speaker
Full range: 10 cm (4
in.) dia.,
3.2 ohms, cone type (2)
Surround speaker (CFD-656 only)
10 cm (4 in.) dia., 8 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack):
For 16 – 64 ohms impedance headphones
Speaker terminals: For supplied 3.2 homs
impedance speaker
Surround speaker terminals (CFD-656 only):
Terminals for supplied 8 ohms impedance speaker
Power output (excluding US model)
4.3 W + 4.3 W (at 3.2 ohm, 10 % harmonic
distortion)
Power requirements
For CD radio cassette-corder:
230-240 V AC, 50 Hz (Australian model)
120 V AC, 60 Hz (Other models)
For remote:
3 V DC, 2 size AA (R6) batteries
Power consumption
AC 27 W
Dimensions
Approx. 646 × 286.5 × 355 mm (w/h/d)
(25
1
2×
11
3
8
×
14
inches)
(incl. projecting parts)
Mass
Approx. 10.5 kg (23 lb. 2 oz)
Supplied accessories
Remote control (1)
AM loop aerial (1)
Surround speakers (2) (CFD-656 only)
Design and specifications are subject to change without
notice.
Optional accessories
Sony MDR headphone series

Other manuals for Sony CFD-646

Related product manuals