— 5 —
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
• The equipment can be removed using the following procedure.
3-1. FRONT CABINET ASSY
Main, LIine in, Lcd board CD board,
Optical pick-up section,
Mechanism deck, belt
Control-1, Headphone board
Cabinet (upper) assy
Cabinet (front) sub assySet
Power, Batt, Tuner, batt com board
0 Connector
qa Cabinet (front) sub assy
1 Lid, battery case
9 Flexible
7 Open the Lid (CD) in
the direction of the arrow.
3 Three screws
+BVTP 3 × 12
8 Screw
+BVTP 3 × 10
2 Five screws
+BVTP 3 × 12
4 Screw
+BVTP 3 × 16
5 Screw
+BVTP 3 × 16
6 Remove the Handle
in the direction of the arrow.