10
CFM-S1MK2
• All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or
less are not indicated except for electrolytics and tantalums.
• All resistors are in Ω and
1
/
4
W or less unless otherwise specified.
• f : internal component.
Note: The components identified by mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
• A : B+ Line.
• H : adjustment for repair.
• Power voltage is dc 6V and fed with regulated dc power supply
from external power voltage jack.
•Voltages are dc with respect to ground under no-signal (detuned)
conditions.
•Voltages are dc with respect to ground in playback mode.
no mark : FM
(): SW1, SW2, MW (RADIO SECTION), PLAY (TAPE
SECTION)
<>: MIC REC
[]: RADIO REC
•Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production toler-
ances.
• Signal path.
F : FM
E : PB
a : REC
• Abbreviation
EA : Saudi Arabia
SP : Singapore
UAE : United Arab Emirates
Note on schematic Diagram: MAIN SECTION (1/2), (2/2)
Ver 1.1 2003.05
To Next Page
Loading...
