Sony CFM-S1MK2 - Installation Notes; Dial Pointer Setting

5
CFM-S1MK2
2-6. NOTE ON INSTALATION
To jack board
Power board (CN901)
Fine tune board (KH2)
Main board (KH1)
Main board (KH101)
Main board (KH102)
To battery terminal board
To speaker
(SP1)
MIC (ECM101)
Power board (KH901)
2-7. DIAL POINTER SETTING
Dress the lead wires as shown in figure.
1
Turn the knob(tune)
fully counterclockwise.
Pointer
Chassis(A)
6
6
Hold the left side of pointer,
then insert the gear section
of pointer to groove of chassis(A).
2
Fit the pointer to the
chassis(B).
5
Set the left side of the
pointer to the convex
portion (a) on the
chassis(B).
Chassis(B)
6
3
7
Bracket(P)
4
Screw + BVTP 3X14
Pointer
Chassis(B)
Pointer
(a)
Chassis(B)