Sony CFM-S1MK2 - Disassembly Procedures; Cabinet Front Assembly Disassembly; MD Assembly Disassembly; Head, Motor, and Belt Removal

3
CFM-S1MK2
Chassis(B)
1
4
2
Screws
+ BVTP 3X10
pointer
Lug
MD ASSY
Rear assy, cabinet
3
Connector
(CNP102)
Connecto
r
(CNP101)
SECTION 2
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-1. CABINET (FRONT) ASSY
2-2. MD ASSY
• The equipment can be removed using the following procedure.
Set
Cabinet (front) assy
JACK board, MAIN board,
FINE TUNE board
BATTERY TERMINAL board,
POWER board
MD assy
Record/playback head (HRP101),
Reel/capstan motor (M101), Belt
4
1
6
Remove solder (two places)
2
Screws + BVTP 3X14
2
Screws + BVTP 3X1
4
Lid, Battery case
Cabinet(front) ASSY
Rear assy, Cabinet
Claws
5
Press the STOP/EJECT button 3
Microphone
2-3. RECORD/PLAYBACK HEAD (HRP101),
REEL/CAPSTAN MOTOR (M101), BELT
1
Screws Tapping+B
MD ASSY
4
Record/playback
head (HRP101)
7
Reel/capstan
motor (M101
)
3
Screws
+ PTT 2X 5
6
Screws + P2X 5
8
Belt
5
Lug (T), plate
2
Guide, tape