Sony CFS-1055 - Dial Pointer Installation Guide

SECTION 2
DIAL POINTER INSTALLATION
Note : Follow the installation procedure in the numerical order given.
(Fig-2)
Knob (Tune}
6) Screw +P2.6x6
(4) Knob (Tune)
Chassis
@) Pointer
Pointer ae
(Fig-1)
Tuner board
Chassis
PVC shaft
Turn the PVC shaft fully counterclockwise.
Place the pointer in the chassis groove.
Line up the tip of the pointer with the notch in the chassis.
(See Fig-1)
Attach so that the knob (Tune) is at the position shown in
Fig-2.
© ©8©80